The Vegas full-range two-way enclosures are available with a choice of 10”, 12” and 15” low frequency drivers, and all the three models are fitted with a 1.75” compression driver, mounted on a rotatable horn assembly. The range can either be floor mounted or suspended either horizontally or vertically using the integral M8 and M6 rigging points.

The units are fitted with passive crossovers and manufactured with top grade components. The compression driver and waveguide are the same on all three models. The rotatable 90° x 60° waveguide offers a great advantage for installation in small rooms, or those with low headroom.

The VEGAS 8 CX, 12 CX and 15 CX are designed and manufactured with the same stringent quality standards applied to Outline’s world class touring audio products. The three VEGAS CX models are ideal multi-purpose, full-range, 2-way bass reflex enclosures equipped with a modern premium custom coaxial driver.

They require only one amplifier channel for correct operation, the frequency splitting between the LF driver and the HF driver being accomplished by the passive crossover network built into the enclosure. The low-loss passive filter ensures a seamless transition between the LF and HF drivers. Combined with the asymmetric cabinet design each VEGAS CX model can be used as a floor monitor or stage front fill if required.

EIDOS 215 S is suited to the high SPL reinforcement of low frequencies, utilising a bass-reflex system design, the 215S is equipped with twin 38 cm (15″) drivers. In order to handle (peak) power values that exceeds the loudspeakers’ (electrical) power capacity, both cabinets use long-excursion woofers fitted with demodulating rings.

All EIDOS subwoofers can accurately reproduce the bottom end of the audio spectrum and are sufficiently dynamic to reproduce all types of music. Performance is very high thanks to the selection and design of the correct components, but also to the careful choice and optimisation of the loading techniques that different enclosures require.

The EIDOS 118 S is suited to the high SPL reinforcement of low frequencies, and utilises a band-pass system, loaded with a single 46 cm (18″) Drive-unit. In order to handle (peak) power values that exceeds the loudspeakers’ (electrical) power capacity, both cabinets use long-excursion woofers fitted with demodulating rings.

All EIDOS subwoofers can accurately reproduce the bottom end of the audio spectrum and are sufficiently dynamic to reproduce all types of music. Performance is very high thanks to the selection and design of the correct components, but also to the careful choice and optimisation of the loading techniques that different enclosures require.

This all-new design from Outline complements the existing EIDOS installation range by providing a unit whose low-frequency extension and power handling capabilities exceed those of the dual-15″ EIDOS 215 S module. Consequently, it is ideal for those applications requiring super-powerful sub bass delivery, including live music and dance venues.

The EIDOS 218 S is particularly well-suited to reproducing modern dance music as the design provides not only extended low-frequency reproduction (down to 28 Hz) but also tremendous ‘punch’ in and around the frequencies normally produced by both real and synthetic bass drums.

This is a result of Outline’s proprietary ‘E.R.P’ design that ensures an optimum laminar airflow because of the unique arrangement of its specially shaped ports.

The Outline iSM 112 is a self-powered, DSP-controlled, full-range loudspeaker designed primarily for stage monitoring applications, whose internal amplifiers deliver 750 W and 370 W into the LF and HF sections respectively. Outline iSM 112 features an asymmetrical design providing dual floor-mount or installation angles.

The iSM 112 delivers a usable frequency response of 68 Hz – 18 kHz at -10 dB. More importantly for its main application, the iSM 112 also delivers an impressively linear response of just +/- 3 dB between 80 Hz and 15.5 kHz, and an extremely linear phase response of just ± 45° between 500 Hz and 16 kHz.

The Outline iSM 115 is a self-powered, DSP-controlled, full-range loudspeaker designed primarily for stage monitoring applications, whose internal amplifier delivers 750 W and 370 W into the LF and HF sections respectively. Outline iSM 115 features an asymmetrical design providing dual floor-mount or installation angles.

The iSM 115 delivers a usable frequency response of 59 Hz – 18 kHz at -10 dB. More importantly for its main application, the iSM 115 also delivers an impressively linear response of just +/- 3 dB between 75 Hz and 15.5 kHz, and an extremely linear phase response of just ± 45° between 500 Hz and 16 kHz.